Safety Instructions
212601 14/03/2023
19
2.1.4 The Working Staff
Only authorized and trained personnel may work on and with the machine.
Unauthorized persons are prohibited from using the machine.
Personnel undergoing training or instruction or who are undertaking a general
programme of education may only work on the machine under the continuous
supervision of an experienced person.
Young people under 18 years are only allowed to work on the machine
As part of their education
After successful detailed instruction and
Under the guidance and supervision of an authorized person.
Works on the electrical equipment or operating materials of the machine may
only be carried out by authorized personnel.
The responsible supervisor must instruct the operating staff at regular inter-
vals, at least once a year, on safe working practices. The instructions must be
appropriately recorded and be signed by the trained staff.
The operating personnel must promptly inform their supervisor of any changes
in the performance of the machine. This applies especially if the safety of the
machine is no longer guaranteed.
Personnel is not permitted to have loose hair, loose clothing or jewellery, in-
cluding rings, when standing near the machine.
The personnel must wear personal protective equipment as required or pro-
vided by a regulation.
2.1.5 The Workplace
Only occupy workplaces which of intended for the operation or maintenance of
the machine. The workplaces must always be dry, clean and unobstructed.
The machine must always be accessible from all sides.
Do not store flammable or explosive substances near workplaces. The work-
ing area must be ventilated so that no hazardous or highly flammable mixtures
or gases can accumulate in dangerous quantities. If necessary, a suitable ven-
tilation system must be installed.
To provide for the possibility of immediate and proper action in the event of
accidents and breakdowns, you must always have at hand at your workplace:
Officially approved fire extinguisher
First aid kit
To Next Page
Loading...
