Maintenance of the Machine
70
14/03/2023 212601
9.7 Repair
Most of repair work requires special knowledge of materials, components, test
stands and equipment. Therefore, this work must only be carried out in consul-
tation with the manufacturer.
Danger
Danger by electric voltage.
Repair work on electrical components may only be carried out by authorized
personnel (electricians).
Make sure that the electrical equipment of the system is de-energized for
the period of repair.
Changes in the circuit logic are only permitted by the manufacturer.
Danger
Danger due to improper work on and with the system.
The repair of the system may only be carried out by instructed and trained
personnel using original spare parts.
Do not dismantle safety devices of the system. If dismantling of safety de-
vices cannot be avoided during repair, you must reinstall the safety devices
and checktheir function.
Prior to restarting after repair measures, check all safety devices.
Note
If the equipment is damaged for unforeseen reasons, the manufacturer must
be consulted before the repair.
Note
It is also essential to observe the repair instructions in the third-party docu-
mentation of the product manufacturer.
Note
Danger to the environment due to incorrect disposal.
Prepare suitable receptacles and containers to collect leaking or spilled oper-
ating materials (e.g., cooling lubricants). Dispose of all used equipment, auxil-
iary materials and replacement parts in a safe and environmentally friendly
manner. Observe the respective regulations and laws for the protection of the
environment.
To Next Page
Loading...
