Why Flott Drill machine does not work?
The Flott Drill might not be working because the power plug isn't properly plugged in or the emergency stop button is activated. Ensure the power plug is securely connected and unlock the emergency stop button. If the issue persists, try acknowledging with the rotary switch/push-button, restarting the machine, or contacting FLOTT Service.
What to do if the Flott Drill display is off?
If the Flott Drill display is off, it could be in standby mode. Try acknowledging with the rotary switch/push-button to bring it back online. If that doesn't work, try restarting the machine or contact FLOTT Service.
How to fix Flott Drill guard active issue?
If the drill guard is active on your Flott Drill, it means the drill guard is not in its protection position. To resolve this, swing the drill guard into the protective position in front of the cutter and confirm with the rotary switch/push-button.
What to do if Flott Drill shows error code?
To address this error, try acknowledging it with the rotary switch/push-button. If the error persists, restart the machine or contact FLOTT Service.
Defines the correct operational purposes and lists prohibited uses of the machine.
Fundamental safety principles for operating the machine safely and reliably.
Ensures the machine is in safe working order with all safety devices functional.
Provides specific safety instructions for handling, commissioning, and operating the machine.
Covers safe practices for machine setup, use, maintenance, and end-of-life procedures.
Details the essential safety features integrated into the machine for user protection.
Lists common error messages, their causes, and recommended remedies.
To Next Page
General
