Introduction
218333 04/03/2020
11
1.2 Legal Provisions
1.2.1 Liability
Arnz FLOTT GmbH Werkzeugmaschinen makes reference to the validity of its
general terms and conditions (see the Internet homepage
http://www.flott.de/de/flott/service/downloads/). These general terms and con-
ditions and the provisions contained therein for the limitation of the liability of
Arnz FLOTT GmbH Werkzeugmaschinen (especially the clauses 8.5, 8.8, 9.1
– 9.3 and 10.)
are part of this operating manual.
The information, data and notes given in the operating manual were up to date
at the time of printing. We reserve the right to technical changes as part of the
further development of the machines. Information, illustrations and descrip-
tions are non-binding. The information, illustrations and descriptions contained
in this operating manual are in particular not subject to any claims or rights for
previously delivered machines.
No liability is accepted for damage or malfunctions that occur as described be-
low:
Failure to comply with the operating manual
Operational errors
Improper working on and with the machine
Use of non-genuine spare parts and accessories of other origin than Arnz
FLOTT GmbH Werkzeugmaschinen
Unauthorized modifications and changes to the machine by the own or its
staff.
The following documents are relevant to the assessment of liability of Arnz
FLOTT GmbH Werkzeugmaschinen towards the user of the machine
With regard to the technical handling of the machine, only the requirements
of this operating manual
In all other cases, the individual contract concluded between the operating
company and Arnz FLOTT GmbH Werkzeugmaschinen in conjunction with
the relevant general terms and conditions of Arnz FLOTT GmbH
Werkzeugmaschinen
The general legal provisions.
In the event that the user themselves or via a third party operates or commis-
sions the machine outside the contract concluded with Arnz FLOTT GmbH
Werkzeugmaschinen or as a buyer after a reselling original purchaser, the lia-
bility of Arnz FLOTT GmbH Werkzeugmaschinen is limited to the liability under
the Product Liability Act and under the general statutory provisions provided
this operating manual has been adhered to.
To Next Page
Loading...
