Troubleshooting
60
04/03/2020 218333
8.3 Release of the Machine After a Fault
Warning
Danger due to improper troubleshooting.
Improper troubleshooting can result in danger to the operating staff and to the
machine.
Specialized work on the mechanics and electrics may only be carried out by
technical staff.
1. If required or specified:
Call qualified and authorized personnel and have the cause of the fault
eliminated.
The error message will disappear on the control panel automatically as
soon as the cause has been eliminated.
2. If further error messages appear on the control panel, you must proceed as
described in operational step 1.
The machine is now released and can be used (see section 6 Operating the
machine, page 38).
To Next Page
Loading...
