Safety Instructions
22
04/03/2020 218333
2.2.2 Commissioning, Operation, Decommissioning
Danger
Danger by electric voltage.
The machine (class A) is designed according to EN55011 for an industrial en-
vironment. In other environments, appropriate measures on part of the operat-
ing company may be necessary.
Warning
Danger due to improper work on and with the machine. Danger by improper
use of the machine.
Only authorized and trained personnel may operate the machine.
Only operate the machine when it is in perfect condition. All safety devices
must be present and functional on the machine. In the event of defects or
malfunctions, the machine must be shut down immediately and secured
against being switched on again.
Restart the machine only after all defects or malfunctions have been recti-
fied and the machine is working properly.
Warning
Danger due to fast rotation of the drill spindle.
Fast rotation of the drill spindle can result in hair or clothing being pulled in.
This can lead to serious injuries.
Therefore, during operation of the machine
It is mandatory to wear a hairnet for long hair or a suitable headgear
Never wear gloves, neckties, bracelets, finger rings, chains or other loose
clothing.
Warning
Danger due to unsecured workpiece.
A sudden jamming of the cutter in the workpiece can cause an unsecured
workpiece to strike and cause injury.
Secure the workpiece to be machined against rotation by clamping it on the
drilling table or by a suitable stop.
Attention
Danger due to lying around cutters or other objects.
Make sure that there are no cutters or other objects in the working area of the
machine, especially in the working area of the drill spindle.
To Next Page
Loading...
