Safety Instructions
18
04/03/2020 218333
2 Safety Instructions
2.1 General Safety Instructions
The machine corresponds to the state of the art at the time of placing the order
and is generally considered to be operationally reliable.
The machine can still be dangerous if
Unauthorized and untrained personnel operates the machine and
The machine is used improperly.
Then there is danger for
People
The machine and
Other property of the operating company.
2.1.1 The Operating Manual
The prerequisite for safe handling and trouble-free operation is knowledge of
the specific safety instructions and safety regulations, e.g.
DGUV Regulation 1 – Principles of Prevention
DGUV Rule 100–500 – Operation of Work Equipment
This operating manual shall be used in particular for safe working on and with
the machine. It contains safety instructions that must be observed.
In addition to the basic safety instructions in this section, you must also ob-
serve the special safety instructions in the other sections. They contain specif-
ic safety instructions for specific instructions that warn you of an impending
danger.
The operating manual must
Be read and understood by all persons who work on and with the machine
before beginning their work
Be available at the place of use of the machine at a designated place and
Be always complete and in perfectly readable state.
If you do not understand this operating manual or individual paragraphs, you
should not start your activity. Ask the technical staff
of the operating company or
of Arnz FLOTT GmbH Werkzeugmaschinen
before you get into a potentially dangerous situation.
To Next Page
Loading...
