126 127www.owair.com
Readings
outside temperature current setting of the recirculation damper
temperature of the air exhausted from the
room
air ow
temperature of the air supplied to the room current swirl diuser setting
temperature at the return of the medium the current state of the gas detector
room temperature
current general operating mode:
Vent - ventilation
Heat - heating HeatRec - heat recovery
Cool - cooling
CoolRec - cool recovery
Room temperature reading from the T-box controller’s
built-in sensor or from the optional NTC wall-mounted
sensor, connected to the Cube control box/enclosure
Cube
readings
Cube
readings
To Next Page
Loading...