125www.owair.com
POLSKIENGLISHРУССКИЙNEDERLANDS
active operating mode active operating mode
Activate the functions of working with a gas detector -
see section „External gas detector” on page 78.
You need to dene 3 parameter values:
- normal working condition
- 1 - rst level of alarm from gas detector - 2 - second
level of alarm from gas detector
airow setting
The icon informs you that
the parameter has been dened in the
calendar. It is possible to change the
parameter temporarily. The change will
only be active in that calendar zone
Manual setting of the recirculation damper
position
The position of the recirculation damper is
changed automatically
depending on air temperatures.
Dampers setting
Damper setting - gas detector
Manual
Auto
Cube
damper
Cube
damper
To Next Page
Loading...