7
5 Repair
This product is a precision sealing device. The design and dimension tolerances are critical to seal
performance. Only parts supplied by Flowserve should be used to repair a seal. To order replacement
parts, refer to the part code and B/M number. A spare backup seal should be stocked to reduce repair
time.
When seals are returned to Flowserve for repair, decontaminate the seal assembly and include an
order marked "Repair or Replace." A signed certificate of decontamination must be attached.
A Safety Data Sheet (SDS) must be enclosed for any product that came in contact with the seal.
The seal assembly will be inspected and, if repairable, it will be rebuilt, tested, and returned.
To Next Page
Loading...
Need help?
General
