1.OPERATION DESCRIPTION
3
Multi-functional meter “Flowtrec Mini ” is recommended for motorboats. It indicates the parameters
of engine operations as well as the boat's movement in a way which allows the users for maximum
fuel efficiency. Apart from the basic parameters, such as engine's RPM , boat's speed, fuel consumption
in l/h, amount of fuel, voltage, motohours it indicates an essential parameter like fuel economy
showing the number of kilometres one can travel on 1 litre of fuel. It is known that fuel consumption is
determined by many factors some of which can be controlled and adjusted by the driver ( speed, weight
distribution, engine trim settings, boat propeller size). But how one is supposed to know how to select
all those settings while having no real metering data ? How to know that e.g. by cutting the speed
by 5 km/h or by lifting the engine up they can travel 20 km instead of 15 km on the same amount of fuel.
The change of fuel consumption in relation to speed in non-linear and it's hard to optimize it without
objective data. The only effective solution in this case is the measurement of a real fuel consumption
and the boat's speed as well as calculating the economy rate which specifies the number of kilometres
covered on 1 litre of fuel. Its very important
users noticeably limit the fuel consumption.
Obviously it doesn't happen automatically since the reading of a measured parameters does not limit
fuel consumption. It's up to the man acting upon these readings and changing the RPM, trim
and ballast that can really limit the consumption of fuel.
2.
LCD SCREEN VIEW
right display: RPM, TIME, MTH
right display: km/h, V, OFF
left display: km/l, l, l/h
left function button
right function button
for economical operation of the boat because this allow the
To Next Page
Loading...
Need help?
General