The screen view while correcting tachometer reading
the screen before multiplier correction
the screen after multiplier correction
5. MOTOHOUR COUNTER (MTH)
Motohour function is active when icon MTH is visible on the top screen. If it isn't, we must press both
buttons simultaneously a few times until it pops up on the screen.
Motohours indicate the total time of engine's operation with the minimum fuel consumption of more than
0.5l/h. It means motohours are not calculated if fuel consumption was smaller than that, for example
if the engine was off but left with ignition on.
Motohour screen view (MTH)
8
7
To Next Page
Loading...
Need help?
General