Fluance Ai60 - Product Setup; Speaker Placement; Connecting Speaker Wires; Connecting Power Adapter

Fluance Ai60 Quick Start Guide
Product Setup
1. Position the speakers with the Active Speaker on the right and the Passive Speaker
on the left.
Passive Speaker Active Speaker
NOTE: If placing the speakers in a cabinet or on a shelf, position the front of the
speakers as close as possible to the front edge of the shelf for optimum audio
performance.
2. Connect one end of the speaker wire to the binding posts on the back of the
Active Speaker and connect the other end of speaker wire to the binding posts on the
back of the Passive Speaker.
IMPORTANT: Ensure the same wire is connected to the same color binding post on
each speaker.
3. Connect the power adapter to the back of the Active Speaker.
Passive Speaker Active Speaker
Loosen the
binding post
Insert speaker
wire through
hole
Tighten the
binding post