15
Record Care
1. Records should be stored vertically in a dry environment away from sources of heat.
2. An anti-static brush can be used to remove dirt from the record’s grooved surface. Use
a record cleaning solution to further clean your records to ensure crystal clear playback.
3. It is important to use the cueing lever when lifting or lowering the tonearm to prevent
accidental slipping and scratching.
Turntable Care
1. Use a soft dry cloth to wipe dust from the turntable surface.
2. Keep the dust cover closed to ensure the turntable components remain dust free.
3. When cleaning the acrylic platter only use microber cloth to avoid scratching the surface.
Parts and Accessories
Replacement parts and turntable accessories are available at www.uance.com/turntables
Stylus Care
1. When the turntable is not in use always keep the provided stylus protector installed to
prevent accidental damage.
2. A stylus cleaning brush can be used to remove dust and debris from the stylus.
3. Enabling the auto stop function will reduce wear and tear on the stylus by stopping the
turntable after playback is completed.
Part Num-
ber
Description
AP03 Frosted Acrylic Platter
BL21 Bubble Level
CA03 90pF RCA Cable
CW12 112g Counterweight
GW03 Ground Wire
HS82 RT82-RT85 Headshell with wires
PFHTCW 100g Counterweight
PFHTDU Dust Cover
PFHTRP Rubber Turntable Mat
RB35 RT82-RT85 Rubber Belt
TA21 Cork Turntable Mat
To Next Page
Loading...
