Fluance RT83 - Installing the Counterweight; Installing the Headshell

Fluance RT82, RT83, RT84, RT85 User Manual
7
Step Two: Installing the Counterweight
Step Three: Installing the Headshell
1. Secure the tonearm using the
tonearm lock.
1. Remove the headshell from the
protective packaging and insert
into the end of the tonearm.
2. Slide the counterweight onto the end
of the tonearm with numbers facing
forward until it clicks on.
2. Tighten the locking nut until the
headshell is secure.
Tonearm Lock
Counterweight
Locking Nut
Headshell
Tonearm