8
WATERFALL MOUNTS CONTINUED
Adjust SPYDR module to ensure full contact is made on the hooks of
the mounting hardware.
With all four mounting brackets attached to the SPYDR module, you can
adjust the mounting hardware along the waterfall deck or adjust the
SPYDR module along the contact points on the mounting hardware to
center on the 4’ x 4’ area.
SOLID DECKING MOUNTS
Suggested application: ideal for hanging on cross bars in a rack system
with solid decking. Offset version available with drip/flood trays. Hardware
included: Solid decking mounts.
For proper uniformity and flexibility for adjustments, position SPYDR with light
bars parallel to the length of the rack.
To mount your SPYDR using solid decking mounts, place SPYDR fixture
gently below the desired hanging area. Adjust cross bars approximately
2.5 ft – 3 ft along the rack, roughly five inches from the edge of the
SPYDR module.
4
1
5
RACK
To Next Page
Loading...