4
Basic connection
• It is recommended to be connected to a multi-system TV.
• Ensure that this player and any other equipment to be connected to the
unit are in the standby or off mode and disconnect the AC power cord
before commencing connection.
• Do not block ventilation holes of any piece of the equipment and position
so that air can circulate freely.
• Read through the instructions before connecting other equipment.
• Ensure that you observe the colour coding when connecting audio and
video cables.
Note:
During DVD play, the TV volume may be at a lower level than during TV
broadcasts. If this is the case, adjust the volume to the desired level.
If the DVD/CD player is connected to the TV through a video cassette recorder,
the picture may not be played back normally with some DVDs. If this is the case,
do not connect the player via the VCR.
To Next Page
Loading...