6
Operations
PREPARATION
• Power on the TV set and select video input mode.
• Power on the audio system which is connected to the player.
GET STARTED
1. Turn on the player and switch the FUNCTION CONTROL to DVD position.
2. Lift CD cover Open area to open the disc tray.
3. Place a disc onto the disc tray.
4. Close CD door by hand and playback will start automatically.
5. When the menu screen appears on the TV, move the navigation buttons or
press the numeric buttons to select a preferred track number, then press
OK button to start playback.
ADJUST THE VOLUME
Rotate the VOLUME CONTROL on the main unit to increase or reduce the volume.
SKIP AHEAD OR BACK
Press NEXT SKIP or PREV SKIP button once during play to skip a chapter (DVD) or
a track (CD) forward or backwards.
RAPID ADVANCE/REWIND
During playback, press F.FWD button or REW button several times to scan the
disc forward or backward at X2, X4, X8, X20 normal speed.
Press PLAY button to resume normal play.
STOP PLAYBACK
Press STOP button during playback to stop playback; the player will activate the
resume function when STOP is pressed in STOP mode. Press PLAY button again,
playback resumes at the point where it was stopped previously; open the disc tray
or press the STOP button one more time to clear the resume function.
SLOW-MOTION PLAY (DVD)
Press SLOW button on the remote control during playback, the disc will be played
at 1/2 normal speed. Each time the button is pressed, the play speed becomes
slower (down to 1/7 normal speed).
Press PLAY button, normal play will resume.
To Next Page
Loading...