Fluid 8021216 - Troubleshooting Common Issues; Maintenance and Other Notes

16
TROUBLESHOOTING
PROBLEM SOLUTION
SD card inserted, camera
powered ON, LED display
prompt“Pleaseinsertcard!”.
• Formatcard.
• Insertcardagainwhen
camera is powered OFF.
• Usehighqualityandhigh
speed SD card.
Camera does not record
automatically when powered
ON.
• Formatcard.
• Usehighqualityandhigh
speed SD card.
The video is not clear.
• Ensurethelensisclean;this
is crucial to the image quality.
Camera does not power ON.
• Checkthepowerconnection.
• Pressthe“POWER/REC”
button to turn the camera ON.
The video pauses or frames
skip during play back.
• Formatcard.
• Usehighqualityandhigh
speed SD card.
MAINTENANCE AND OTHER NOTES
1. The camera uses a 12-24V DC power supply. Be sure to use the
proper power adapter.
2. Keepthelensclean;thisiscrucialtotheimagequality.Avoid
touching the lens directly. If the surface of the lens is dirty, use a
cloth to wipe the lens.
3. The camera uses an SD card as external media. Using cyclical
recording for a long period of time may cause fragments in
the media. This will downgrade the performance of the media
access. It is suggested to format the SD card (the format
operation under Settings mode is recommended) periodically,