Fluke 113 Technical Data

Technical Data
Fluke 113
Basic Multimeter
Features include:
•
VCHEK™ LoZ low impedance measurement function to
simultaneously test for voltage and continuity
•
True-rms for accurate ac measurements on non-linear loads
•
A large backlit display allows for easy visibility in low-lit areas
•
Record signal fluctuations using the Min/Max function
•
Diode test for testing general-purpose germanium, silicon,
and power diodes
•
Integral holster with probe holders for easy storage
•
Auto and Manual ranging for added user functionality
•
Meets Measurement Category CAT III 600 V and
Category IV 300 V standards for a higher level of safety
•
The optional TPAK magnetic hanger allows the user hands-free
flexibility
True RMS Basic Multimeter
designed for basic electrical tests
The new 113 Basic Multimeter has the features
needed to repair most electrical problems.
This meter is simple to use and has significant
improvements over Fluke’s original 7-600, and
other utility multimeters. With features such
as Fluke’s VCHEK™, added measurement
functions, backlight, conformance to the latest
safety standards, and a much larger display
that’s easier to view, this new meter is a must
have for the utility users toolbox.
N10140
R

Fluke 113 Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	0.5 - 1 kHz
AC voltage range	2000 - 0.001 V
DC voltage range	6000 - 0.001 V
Capacitance range	1000 - 1 nF
Resistance resolution	0.1 Ω
Resolution (DC voltage)	0.1 mV
Basic accuracy (DC current)	2.0% + 3
Basic accuracy (capacitance)	1.9% + 2 100 μF - 1000 μF: 1.9% + 2 1000 μF: 5% + 20
Temperature measurement range	-10 - 50 °C
Dimensions (WxDxH)	167.1 x 85.1 x 46 mm
Battery voltage	9 V

Weight and Dimensions

Weight	404 g