Fluke 113 Calibration Information

®
April 2008 ©2008 Fluke Corporation. All rights reserved. Specifications subject to change without notice. 1
113
Electrical Multimeter
Calibration Information
Introduction
XWWarning
To avoid electric shock or injury, do not perform the performance tests or
calibration adjustment procedures unless qualified to do so.
The information provided in this document is for the use of qualified personnel
only.
The 113 Calibration Information provides the information necessary to adjust and verify the performance of the
Fluke Model 113 Electrical Multimeter (hereafter known as the Meter).
The following information is included in this document:
• Safety Information and International Electrical Symbols (page 2)
• Specifications (page 3)
• Replacing the Battery (page 5)
• Cleaning (page 5)
• Performance Tests (page 5)
• Calibration Adjustment (page 7)
• Replacement Parts and Accessories (page 11)
• Complete Warranty (page 12)
See the 113 Users Manual for complete operating instructions.
Contacting Fluke
To contact Fluke, call one of the following telephone numbers:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's Web site at www.fluke.com
.
To register your product, visit http://register.fluke.com

Fluke 113 Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	0.5 - 1 kHz
AC voltage range	2000 - 0.001 V
DC voltage range	6000 - 0.001 V
Capacitance range	1000 - 1 nF
Resistance resolution	0.1 Ω
Resolution (DC voltage)	0.1 mV
Basic accuracy (DC current)	2.0% + 3
Basic accuracy (capacitance)	1.9% + 2 100 μF - 1000 μF: 1.9% + 2 1000 μF: 5% + 20
Temperature measurement range	-10 - 50 °C
Dimensions (WxDxH)	167.1 x 85.1 x 46 mm
Battery voltage	9 V

Weight and Dimensions

Weight	404 g