Fluke 345
Power Quality
Clamp Meter
Monitor electronic loads.
Combining a power analyzer, power
quality logger, and clamp meter, the
Fluke 345 is ideal for commissioning
and monitoring electronic loads.
• Set up and troubleshoot
variable frequency drives
and UPS systems
Accurately measure key power
quality parameters. A low-pass filter
removes high frequency noise.
• Uncover harmonic issues that
damage or disrupt equipment
Analyze the harmonic spectrum
graphically, with the bright, color,
power meter display, or digitally.
• Measure inrush current to
capture nuisance circuit-
breaker tripping from 3 to
300 seconds.
• Verify system capacity with
load studies—before adding
loads.
• Measure dc current up to
2000 A without breaking the
circuit
The Hall Effect clamp meter design
makes it possible.
• Analyze trends or catch
intermittent problems with long-
term power quality monitoring.
Monitor for minutes or months,
including harmonics, with high-
capacity internal memory.
• Measures three-phase balance
loads.
• 600 V CAT IV safety rating for
use at the service entrance.
• Includes Power Log software
for generating reports and viewing
graphs.
Fluke 43B
Power Quality
Analyzer
Get control of power problems.
Maintain power systems, troubleshoot
power problems, and diagnose
equipment failures with one rugged,
handheld tool. The Fluke 43B com-
bines the most useful capabilities of
a power quality analyzer, multimeter,
and scope.
• Combines the most useful capabili-
ties of a power quality analyzer,
multimeter and scope.
• Trends voltage, current, frequency,
and power harmonics.
• Captures voltage sags, transients,
and inrush current.
• Tracks intermittent problems
and power system performance
with monitoring functions. Records
two selectable parameters up to
16 days.
• Calculates 3-phase power on
balanced loads with a single-phase
measurement.
• Measures resistance, diode voltage
drop, continuity, and capacitance.
• 6.5 hours of operating time with
new NiMH battery.
• Includes FlukeView
®
software
for logging readings over time in
cluding a complete harmonic profile
up to the 51st harmonic.
Fluke 430 Series II
Three-Phase Power Quality
and Energy Analyzers
Pinpoint power quality problems
and monetize energy loss.
The new 430 Series II analyzers offer
the best in power quality analysis,
and introduce, for the first time ever,
the ability to monetarily quantify
losses caused by power quality issues.
Use for:
• Frontline troubleshooting
Quickly diagnose problems
on-screen to get your operation
back online.
• Energy loss management
Measure and quantify specific
causes of energy losses to enable
simple return-on-investment
calculation of harmonics and
unbalance mitigation equipment.
• Power inverter efficiency
Simultaneously measure AC input
power and DC output power for
power electronics systems.
• Capture fast RMS data, show half-
cycle and waveforms to character-
ize electrical system dynamics.
• Predictive maintenance
Detect and prevent power quality
issues before they cause downtime.
• Quality of service compliance
Validate incoming power quality
at the service entrance.
• Long-term analysis
Uncover hard-to-find or intermittent
issues.
• Load studies
Verify electrical system capacity
before adding loads.
• Dynamic load testing
Capture instantaneous values to
see the effect of load switch on
generators and UPS systems.
Fluke VR1710
Power Quality
Recorder
A simple plug-in voltage logger
to pinpoint what’s happening at
single phase outlets.
Whether it’s loose connections or
transients caused by equipment
switching or lightning strikes the
VR1710 will find the problem. Power
quality parameters including rms
average, transients, flicker, and har-
monics up to the 32nd, are recorded
using a user-selected average period
from one second to 20 minutes.
• Fast and easy recording of
voltage trends, dropouts, and
power quality
Easily pinpoint the root cause of
single phase voltage problems.
• Continuous recording of all
values with no gaps
Save testing time by getting the
whole picture with one instrument
that records both events and voltage.
• Min, Max, and Average rms
values (1/4 cycle) with time
stamp
Quickly see what happened and
when.
• Includes PowerLog software
package for quick download,
analysis, and automatic reporting–
Save time by generating power
quality reports automatically with
pre-set templates.
Loggers
Troubleshooters
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com
To Next Page
Loading...
Need help?
General
