Fluke 1730 - User Manual

July 2014
© 2014 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
1730
Energy Analyzer
Calibration Manual

Summary

Limited Warranty and Limitation of Liability

Safety Information

General Safety Warnings

Crucial safety precautions to prevent electrical shock, fire, and personal injury during operation.

Setup

Required Equipment

Lists necessary equipment for verification and calibration procedures.

Calibration Cable Assembly

Instructions and parts for assembling the voltage-to-current input calibration cable.

Verification Box Assembly

Details on constructing a verification box for accurate voltage sourcing.

System Requirements and USB Communication

How to Use the Spreadsheet

Dashboard

Calibration and Verification Procedures

Accuracy Verification Procedure

Voltage Measurement Verification

Current Measurement Verification

AUX Input Check

Flexi and Clamp Probe Verification Overview

Clamp Current Probe Input Verification

Calibration Adjust Procedure

Fluke 1730 Specifications

General

Power Quality	Yes
Data Logging	Yes
Display	Color LCD
Enclosure	IP50
Safety Rating	CAT IV 600 V / CAT III 1000 V
Weight	1.1 kg
Current Measurement Range	Depending on probe: 0.5 A to 6000 A
Power Quality Parameters	Harmonics, Flicker, Unbalance
Power Accuracy	± 0.5 %
Communication Interface	USB, Ethernet
Operating Temperature	-10°C to +50°C
Dimensions	198 mm x 167 mm x 59 mm