Fluke 1730 User Manual

1730
Calibration Manual
8
Maintenance
If the Logger is used appropriately it does not require special maintenance or
repair. Maintenance work may be executed only by trained and qualified
personnel. This work may only be done at a company related service center
within the guarantee period. See www.fluke.com for locations and contact
information of Fluke Service Centers worldwide.
Warning
To prevent possible electrical shock, fire, or personal injury:
• Do not operate the Product with covers removed or the case
open. Hazardous voltage exposure is possible.
• Remove the input signals before you clean the Product.
• Use only specified replacement parts.
• Have an approved technician repair the Product.
How to Clean

Caution
To avoid damage, do not use abrasives or solvents on this
instrument.
If the Logger is dirty, wipe it off carefully with a damp cloth (without cleaning
agents). Mild soap may be used.
Battery Replacement
The Logger has an internal rechargeable Lithium-ion battery.
To replace the battery:
1. Remove the Power Supply.
2. Unscrew the four screws and remove the battery door.
3. Replace the battery.
4. Fasten the battery door.

Caution
To prevent damage to the Product, use only original Fluke
batteries.

Fluke 1730 Specifications

General

Power Quality	Yes
Data Logging	Yes
Display	Color LCD
Enclosure	IP50
Safety Rating	CAT IV 600 V / CAT III 1000 V
Weight	1.1 kg
Current Measurement Range	Depending on probe: 0.5 A to 6000 A
Power Quality Parameters	Harmonics, Flicker, Unbalance
Power Accuracy	± 0.5 %
Communication Interface	USB, Ethernet
Operating Temperature	-10°C to +50°C
Dimensions	198 mm x 167 mm x 59 mm