Need help?Do you have a question about the Fluke 1736 and is the answer not in the manual?
General| Product type | Three phase power measurement logger |
|---|---|
| Cable lock slot type | Kensington |
| International Protection (IP) code | IP50 |
| Operating altitude | 0 - 4000 m |
| Non-operating altitude | 0 - 12000 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Built-in display | Yes |
| Display diagonal | 4.3 \ |
| Touchscreen type | Resistive |
| Display resolution | 480 x 272 pixels |
| Display technology | TFT |
| Efficiency | 68.2 % |
| Battery life | 4 h |
| Charging time | 6 h |
| Battery voltage | 3.7 V |
| Input frequency | 50/60 Hz |
| Battery capacity | 9.25 Wh |
| Power consumption (max) | 50 VA |
| Battery life (power save mode) | 5.5 h |
Weight and Dimensions| Depth | 55 mm |
|---|---|
| Width | 198 mm |
| Height | 167 mm |
| Weight | 1100 g |
| Power adapter weight | 400 g |
| Power supply dimensions (WxDxH) | 130 x 45 x 130 mm |
Warns about hazardous conditions and procedures for safe operation.
Guides on charging the internal rechargeable Lithium-ion battery before first use and afterward.
Provides details on harmonic spectrum, trend charts, and harmonic limits.
Selects the study type (Energy or Load) based on application needs.
Selects power quality standards for compliance evaluation, supporting EN 50160 and IEEE 519.
Explains how to select the appropriate distribution system topology for connection diagrams.
Configures measurement duration, start, and stop dates/times for logging sessions.
Displays average, min/max measured values for Voltage, Current, Frequency, and AUX.
Displays power values (Active, Apparent, Non-active) and Power Factor.
Provides pass/fail analysis of power quality parameters against EN 50160 standard.
Shows average THD, voltage harmonics, and voltage events.
Displays graphs of power quality parameters: Voltage, Frequency, and Unbalance.
Shows harmonics relative to user-defined limits, highlighting violations.
Captures and displays events on voltage and current (dips, swells, interruptions, inrush).
Lists, reviews, deletes, and saves logging sessions to USB.
Configures language, date/time, phase info, currency, firmware, WiFi, and touch calibration.
Sets up WiFi connection details for PC/smartphone/tablet connectivity.
Provides instructions for updating the Logger's firmware using a USB flash drive.
Guides new users through initial setup, including language, standards, and connections.
Guides users on starting their first measurements or energy study.
Details the process for activating licenses via the Fluke website.
Details the capabilities of the included Fluke Energy Analyze Plus PC software.
Explains using WiFi dongle for Fluke Connect App, wireless control, and data download.
Guides on setting up WiFi connection mode (Direct or Infrastructure).
Details establishing a direct WiFi connection using WPA2-PSK and a passphrase.
Explains connecting to a WiFi access point using WPA2-PSK and DHCP.
Enables remote control via VNC clients on Windows, Android, iOS, and Windows Phone.
Details using WiFi for Fluke Energy Analyze Plus software for data transfer and synchronization.
Explains the wireless system connecting test tools, apps, and cloud storage.
To Next Page
