Fluke 1736 User Manual

1736/1738
Users Manual
32
The menu also provides the access to live values of
Energy as:
• Active Energy (E
p
) Wh
• Reactive Energy (E
Q
r) in varh
• Apparent Energy (E
s
) in VAh
To display a trend chart of the last 7 minutes of Power
values:
1. Push  (Live-Trend).
2. Use  or the cursor keys to show the list of
available parameters.
3. Push  (Reset) to clear the graph and restart.
Note
In the user interface, the term Fundamental is
sometimes shortened to “Fund.” or “h01.”
Logger
 – In Logger mode, you can:
• Configure a new logging session
• Review the data of an ongoing logging session in
memory
• Review the data of a completed logging session (as
long as no new session has been started)
Push  and then  (Logging Sessions) to review a
logging session.
Logging Session Setup
When no logging session is active, push  to display the
Setup Summary screen for logging. This screen lists all
logging parameters such as:
• Session name
• Duration and optional recording date and time for
start/stop
• Interval of the average calculation
• Demand interval (not available for load studies)
• Energy costs (not available for load studies)
• Description

Fluke 1736 Specifications

General

Product type	Three phase power measurement logger
Cable lock slot type	Kensington
International Protection (IP) code	IP50
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 12000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Built-in display	Yes
Display diagonal	4.3 \
Touchscreen type	Resistive
Display resolution	480 x 272 pixels
Display technology	TFT
Efficiency	68.2 %
Battery life	4 h
Charging time	6 h
Battery voltage	3.7 V
Input frequency	50/60 Hz
Battery capacity	9.25 Wh
Power consumption (max)	50 VA
Battery life (power save mode)	5.5 h

Weight and Dimensions

Depth	55 mm
Width	198 mm
Height	167 mm
Weight	1100 g
Power adapter weight	400 g
Power supply dimensions (WxDxH)	130 x 45 x 130 mm