Fluke 1736 User Manual

1736/1738
Users Manual
46
Status Information
The screen provides information and status about the
Logger, such as the serial number, attached current
probes, battery status, and installed licenses.
To go to the status information:
1. Push .
2. Push  (Instrument Settings).
3. Push  (Info).
4. Push  to exit the screen.
Firmware Version
To find the firmware version installed on your Logger:
1. Push .
2. Push  (Instrument Settings).
3. Push  (Tools).
4. Push  to select Firmware version and push 
or touch the Firmware version target.
5. Push  to exit the screen.
Touch Screen Calibration
The touch screen has been calibrated at the factory before
shipment. In case you do experience misalignment with
the touch targets, use the touch screen calibration feature.
To calibrate:
1. Push .
2. Push  (Instrument Settings).
3. Push  (Tools).
4. Push  to highlight Touch Screen Calibration and
push  or touch the Touch Screen Calibration
target.
5. Touch the five cross hair targets as exactly as
possible.
WiFi Configuration
To configure the first-time WiFi connection of a
PC/smartphone/tablet to the Logger, setup the WiFi details
in the Tools screen.
To view the WiFi setup parameters:
1. Push .
2. Push  (Instrument Settings).
3. Push  (Tools).

Fluke 1736 Specifications

General

Product type	Three phase power measurement logger
Cable lock slot type	Kensington
International Protection (IP) code	IP50
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 12000 m
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Built-in display	Yes
Display diagonal	4.3 \
Touchscreen type	Resistive
Display resolution	480 x 272 pixels
Display technology	TFT
Efficiency	68.2 %
Battery life	4 h
Charging time	6 h
Battery voltage	3.7 V
Input frequency	50/60 Hz
Battery capacity	9.25 Wh
Power consumption (max)	50 VA
Battery life (power save mode)	5.5 h

Weight and Dimensions

Depth	55 mm
Width	198 mm
Height	167 mm
Weight	1100 g
Power adapter weight	400 g
Power supply dimensions (WxDxH)	130 x 45 x 130 mm