Need help?Do you have a question about the Fluke 1775 and is the answer not in the manual?
General| Voltage Measurement Range | 1000 V AC/DC |
|---|---|
| Communication | USB |
| AC Voltage Range | 1 V to 1000 V |
| DC Voltage Range | 1 V to 1000 V |
| Safety Rating | CAT IV 600 V, CAT III 1000 V |
Enables wireless connectivity for data transfer, time synchronization, and remote control.
Rogowski coil probe for measuring alternating current using the R-coil principle.
Instructions for powering the Analyzer using the mains adapter and power cord.
Procedure for powering the Analyzer directly from the measurement line voltage.
Information on operating the Analyzer using its internal battery, including life and charging.
Explains connection methods like USB, Ethernet, and Wi-Fi for PC software.
Mode for instant measurements to troubleshoot power quality issues.
Basic setup options accessible from the Start Up Wizard and measurement settings.
Defines conditions for capturing detailed RMS, waveform, or transient data.
Settings for capturing rapid voltage changes and transient overvoltages.
Enables evaluation method for captured measurements based on selected standards.
Allows selection of standards (e.g., EN50160) for ongoing measurement evaluation.
Summarizes overall PQ Health parameters like voltage, harmonics, and events.
Settings for Ethernet, Wi-Fi client, and Wi-Fi access point connections.
To Next Page
