To Next PageTo Next Page
Need help?Do you have a question about the Fluke 1630-2 and is the answer not in the manual?
General| Type | Earth Ground Clamp Meter |
|---|---|
| Ground Resistance Range | 0.025 Ω to 1500 Ω |
| Display | LCD |
| Data Logging | Yes |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -20 °C to 60 °C |
| Ground Resistance Accuracy | ±(1.5% + 0.02 Ω) |
| Jaw Opening | 32 mm |
| Power Supply | AA batteries |
| Safety Rating | CAT IV 600 V |
Instructions for turning the clamp on and off, including auto-off feature.
Overview of the clamp's display icons and physical control buttons.
Configures the time interval for data logging between measurements.
Sets the high and low thresholds for the alarm function.
Sets the time and date for data logging timestamps.
Accesses sub-menus for backlight, power auto-off, and firmware.
Explains how to perform ground resistance tests using the clamp.
Procedure for measuring AC leakage current using the clamp.
Instructions for recording and saving measurements over time.
How to freeze the displayed measurement value.
How to enable or disable the filter for noise reduction.
Details on using the Fluke Connect mobile application with the clamp.
Specifications for ground loop resistance measurement range and accuracy.
Specifications for AC leakage current measurement range and accuracy.
