Need help?Do you have a question about the Fluke 2635A and is the answer not in the manual?
General| Type | Data Acquisition System |
|---|---|
| Model | 2635A |
| Category | Test Equipment |
| Channels | 20 |
| Input Types | DC Voltage, DC Current, Resistance |
| Thermocouple Types | J, K, T, E, R, S, N, B |
| RTD Types | Pt100, Pt1000 |
| Frequency Range | 100 kHz |
| Period Range | 10 μs |
| Accuracy | Varies by function and range. See datasheet for details. |
| Communication Interface | RS-232 |
| Power Supply | 100 V to 240 V AC, 50 Hz to 60 Hz |
| Dimensions | 88 mm |
Covers unpacking, inspecting, and connecting the instrument to power.
Details how to turn the instrument on with various power-on options.
Provides procedures for setting up channels for DC Volts, AC Volts, Resistance, Frequency, Temperature.
Covers setting scan interval, measurement rate, alarms, and Mx+B scaling.
Instructions for handling memory cards, including changing during scanning.
Procedure for formatting a memory card for use with the instrument.
Sets the destination and mode for saving scan data to memory card or printer.
Instructions for storing, loading, and erasing instrument configuration files.
Guides on opening, saving, and erasing measurement data files.
Explains how the instrument processes input and output, and status registers.
Provides procedures for verifying instrument performance and accuracy.
Detailed specifications for DC Voltage, AC Voltage, Resistance, Temperature measurements.
To Next Page
