Fluke 2700G - User Manual

September 2013
© 2013 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
2700G
Reference Pressure Gauge
Calibration Manual
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Fluke 2700G Specifications

General

Resolution	0.001 psi
Temperature Range	-10°C to 50°C
Communication	RS-232, USB
Operating Temperature	-10°C to 50°C
Power	9V battery or AC adapter
Display Type	LCD
Interface	RS-232, USB
Power Supply	9V battery or AC adapter
Display	LCD
Media Compatibility	Non-corrosive gas or liquid
Measurement Functions	Pressure
Voltage Range	Not Applicable
Current Range	Not Applicable
Resistance Range	Not Applicable
Frequency Range	Not Applicable
Accuracy DC voltage	Not Applicable

Summary

Introduction

Standard Equipment

Safety Information

Symbols

Maintenance

Clean the Product

Procedure for cleaning the product using a soft cloth and mild soap.

Change the Batteries

Step-by-step instructions for replacing the product's batteries safely.

Specifications

Instrumental Measurement Uncertainty

Details the accuracy of the product for pressure and vacuum measurements.

Media Compatibility

Lists compatible media (liquids and gases) for use with the pressure gauge.

Environmental Specifications

Defines operating and storage conditions like temperature, humidity, and altitude.

Mechanical Specifications

Covers physical dimensions, connection type, housing material, and display characteristics.

Available Pressure Ranges

Necessary Equipment

Calibration Tests

Connections

Initiate Communication

Calibration Steps

Serial Point Adjustment

Procedure for adjusting the product's calibration using serial port commands.

User-Replaceable Parts