Reference Pressure Gauge
Symbols
3
Caution
To prevent possible damage to Product or to equipment under
test:
• The display reads “OL” when the pressure source is above
the Product range limit. The pressure source must
immediately be removed.
• Do not apply more than the maximum torque specified.
Maximum torque specified is 20 Nm = 15 ft-lb.
Symbols
Symbols used on the Product and in this manual are in Table 1.
Table 1. Symbols
Symbol Meaning Symbol Meaning
Risk of danger. Important
information. See manual.
Conforms to European Union
directives.
Hazardous voltage. Risk of
electrical shock.
Conforms to relevant North
American Safety Standards.
Conforms to relevant Australian
standards.
This product complies with the
WEEE Directive (2002/96/EC)
marking requirements. The affixed
label indicates that you must not
discard this electrical/electronic
product in domestic household
waste. Product Category: With
reference to the equipment types in
the WEEE Directive Annex I, this
product is classed as category 9
"Monitoring and Control
Instrumentation” product. Do not
dispose of this product as unsorted
municipal waste. Go to Fluke’s
website for recycling information.
To Next Page
Loading...
