Fluke 302+ - Jaw Maintenance; How to Clean the Product; Specifications; Electrical Specifications

302+/303
Users Manual
8
Jaw Maintenance
If the Product does not work properly:
1. Inspect the jaw matting surface for cleanliness. If any foreign material (including rust) is
present, the jaw will not close properly and measurement errors will result.
2. Open the jaws and wipe the clamp metal ends with a lightly oiled cloth.
How to Clean the Product
Regularly wipe the case with a damp cloth and mild detergent.
 Caution
To prevent damage to the Product, do not use abrasives or solvents to clean
the Product case.
Specifications
Electrical Specifications
AC Current (Jaw)
Range
302+ ........................................................ 400.0 A
303 .......................................................... 600.0 A