Fluke 317 - Page 4

2352 Walsh Ave. Santa Clara, CA 95051. U. S. A. Tel.: (408) 748-9100, Fax: (408) 748-9111 www.analogtechnologies.com
Copyrights 2000 – 2012, Analog Technologies, Inc. All Rights Reserved. Updated on 11/22/2012 4
A
nalog Technologies
317 and 319
Clamp Meter
(V ac)
Resolution 0.1V
Accuracy 1.5%±5 digit (20-500Hz)
AC response rms
(V dc)
Range 600.0V
Resolution 0.1V
Accuracy 1%±4 digit
Ω
Range
400.0Ω
4000Ω
Resolution
0.1Ω
1Ω
Accuracy 1%±5 digit
≤ 30Ω
Inrush Integration time N/A 100ms
Hz
Range N/A 5.0-500.0Hz
Accuracy N/A 0.5%±5 digit
Trigger Level N/A
10-100Hz ≥5
A, 5-10Hz,
100-500Hz ≥10A
The accuracy specifications apply at 73℉±41℉ (23℃±5 )℃
Below 64 and above 82 (18 and above 28 ) accuracy degrades at (0.1) times specification per .℉℉℃℃ ℃
True rms for ac V and ac A accuracy is specified from 5% to 100% of range.
Table 3. Environmental Specifications
Operating Temperature 14℉ to 122℉ (-10 to 50℃℃)
Storage Temperature -40℉ to 140℉ (-40℃ to 60℃)
Operating Humidity
Non condensing (<50℉) (<10℃)
90% RH (50℉to 86℉) (10℃ to 30℃)
75% RH (86℉ to 104℉) (30℃ to 40℃)
45% RH (104℉ to 122℉) (40℃ to 50℃)
Without Condensation
Operating Altitude 1 mile (2000 meters) above mean sea level
Storage Altitude 7 miles (12,000 meters ) above mean sea level
IP Rating IP40
Vibration Requirements
Random MIL-PRF-28800F Class 2, 5-500HZ, 30
minutes per axis
Drop Test Requirements 3 ft (1m) drop test, six sides, oak floor
EMI, RFI, EMC Instrument unspecified for use in EMC field ≥0.1V/m