Need help?Do you have a question about the Fluke 319 and is the answer not in the manual?
General| Category | Clamp Meter |
|---|---|
| AC Voltage Range | 0.1 V to 600 V |
| DC Voltage Range | 0.1 V to 600 V |
| Continuity | ≤ 30 Ω |
| Safety Rating | CAT III 600 V |
| Battery Type | 2 x AAA |
| AC Voltage Accuracy | ±1.5% + 5 digits |
| Display | LCD |
| AC Current Accuracy | ±2% ±5 digits |
| DC Current Accuracy | ±2% ±5 digits |
Provides contact information for Fluke support and services via telephone.
Crucial safety precautions to prevent electrical shock, fire, and personal injury during operation.
Detailed instructions on safe usage, handling, and maintenance, including voltage limits and environment.
Guidelines for using test leads, operating the product safely, and general precautions for measurements.
Defines the various safety and functional symbols used in the manual and on the product.
Details of the clamp meter's general features, display, power source, dimensions, and safety ratings.
Technical parameters for AC/DC current and voltage measurements, including range, resolution, and accuracy.
Specifies the frequency measurement range, accuracy, and trigger level for the clamp meter.
Information on calibration, data security, operating temperature, humidity, altitude, and IP rating.
Illustrates the clamp meter, highlighting key components like jaws, dial, and display.
Explains the function and importance of the jaw wear indicator for product integrity.
Demonstrates how to perform AC and DC voltage measurements using the clamp meter and leads.
Details the procedure for measuring resistance, including low resistance checks.
Explains how to use the Display Hold and MIN MAX AVG functions for capturing readings.
Guides on how to measure inrush current, including the setup and measurement process.
Provides visual instructions on how to open the battery compartment and replace batteries.
To Next Page
