Detachable Jaw True-rms Clamp Meter
Safety Information
5
Caution
To avoid possible damage to the Meter or to equipment under test:
• Use the proper jacks, function, and range for the measurement application.
• Clean the case and accessories with a damp cloth and mild detergent only.
Do not use abrasives or solvents.
Table 1. Symbols
Symbol Meaning Symbol Meaning
AC (Alternating Current)
Earth ground
DC (Direct Current)
AC and dc current.
Hazardous voltage
Risk of Danger. Important
information. See Manual.
Battery. Low battery when shown.
The Meter shuts down when the
battery reaches 2.0 V.
Double insulated
Do not dispose of this product as
unsorted municipal waste. Go to
Fluke’s website for recycling
information.
Conforms to relevant North American
Safety Standards.
To Next Page
Loading...
