Fluke 375 Specifications

2 Fluke Corporation 374 and 375 True-rms AC/DC Clamp Meters
•
Proprietary inrush measure-
ment technology to filter
out noise and capture motor
starting current exactly as the
circuit protection sees it
•
Ergonomic design fits in your
hand and can be used while
wearing personal protective
equipment
•
Large, easy to read, backlight
display automatically sets the
correct measurement range
so you do not need to change
switch positions while taking
a measurement
•
Three-year warranty
•
Soft carrying case
Specifications
Fluke 374 and 375 Range Max Resolution Accuracy
AC current via jaw 600 A 0.1 A 2 % ± 5 digits
AC current via iFlex
™
(optional) 2500 A 0.1 A 3 % ± 5 digits
DC current 600 A 0.1 A 2 % ± 5 digits
AC voltage 600 V 0.1 V 1.5 % ± 5 digits
DC voltage 600 V
0.1 mV (375)
0.1 V (374)
1 % ± 5 digits
Resistance
60,000 Ω (375)
6000 Ω (374)
0.1 Ω 1 % ± 5 digits
Frequency (375 only) 500 Hz 0.1 Hz 0.5 % ± 5 digits
Capacitance 1 µF to 1000 µF 1 µF 1 % ± 4 digits
True-rms
•
Continuity
•
Hold
•
Backlight
•
Min/Max
•
Inrush
•
Low pass filter Fluke 375 only
18 in iFlex
™ Flexible Current Probe Optional accessory
10 in iFlex
™ Flexible Current Probe Optional accessory
Wire capacity 750 MCM or 2-500 MCM
Safety rating CAT III 1000 V, CAT IV 600 V
Ordering information
374 True-rms AC/DC
Clamp Meter
375 True-rms AC/DC
Clamp Meter
Optional accessories
i2500-10 iFlex
™
Flexible
Current Probe, 10 inches
i2500-18 iFlex
™
Flexible
Current Probe, 18 inches
Models Feature Changes
Old model: Fluke 337
New model: Fluke 376 Includes all 337 features plus:
•
CAT IV 600 V, CAT III 1000 V
•
iFlex™
2500 A ac
•
1000 V ac/dc
•
mV dc
•
60 kΩ
•
1000 µF
Old model: Fluke 336
New model: Fluke 375 Includes all 336 features plus:
•
CAT IV 600 V, CAT III 1000 V
•
Optional iFlex™ 2500 A ac
•
mV dc
•
60 kΩ
•
1000 µF
•
Min/Max/Avg
New model: Fluke 374 Includes all 336 features
(except low pass filter) plus:
•
CAT IV 600 V, CAT III 1000 V
•
Optional iFlex™ 2500 A ac
•
1000 µF
•
Min/Max/Avg
Old model: Fluke 335
New model: Fluke 374 Includes all 335 features plus:
•
CAT IV 600 V, CAT III 1000 V
•
Optional iFlex™ 2500 A ac
•
600 A ac/dc
•
1000 µF
•
Min/Max/Avg
New model: Fluke 373 Includes all 335 features
(except inrush) plus:
•
CAT IV 300 V, CAT III 600 V
•
1000 µF
Old model: Fluke 334
New model: Fluke 374 Includes all 334 features plus:
•
CAT IV 600 V, CAT III 1000 V
•
Optional iFlex™ 2500 A ac
•
True-rms
•
600 A ac/dc
•
1000 µF
•
Min/Max/Avg
New model: Fluke 373 Includes all 334 features
(except inrush) plus:
•
CAT IV 300 V, CAT III 600 V
•
True-rms
•
1000 µF
Old model: Fluke 333
New model: Fluke 373 Includes all 333 features plus:
•
CAT IV 300 V, CAT III 600 V
•
True-rms
•
600 A ac
•
6000 Ω
•
1000 µF

Fluke 375 Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	0.005 - 0.5 kHz
AC voltage range	0 - 1000 V
DC current range	0 - 600 A
DC voltage range	0 - 600 V
Resistance range	1 - 60000 Ω
Capacitance range	1 - 1000 nF
Measuring category	CAT IV 600V
Resistance resolution	1 Ω
Resolution (frequency)	0.1 Hz
Resolution (AC current)	1 µA
Resolution (DC voltage)	500 mV
Basic accuracy (frequency)	0.5%
Basic accuracy (DC current)	2%
Basic accuracy (resistance)	1%
Battery type	AA
Number of batteries supported	2

Weight and Dimensions

Depth	45 mm
Width	85 mm
Height	249 mm
Weight	395 g