Fluke 51 II Series - Changing a Setup Option

51 & 52 Series II
Users Manual
6
Display Elements
xx
2
3
4
5
6
7
8
9
10
1
aas02f.eps
Figure 2. Display Elements
Table 4. Display Elements
 The thermocouple measurement includes an
offset. See "Changing Setup Options."
 The displayed readings do not change.
 A shift function is in progress.
 Setup is in progress.
 Low battery. Replace the batteries.
 Primary Display.
Model 51: T1 reading.
Model 52: T1, T2, or T1-T2 reading.
 The temperature unit.
 Secondary Display: MAX, MIN, AVG, or offset.
Model 52: T1 or T2 reading.
 The thermocouple type.
 Time Display: The elapsed time.
1.888.610.7664 info@Fluke-Direct.com
Fluke-Direct
.com