EasyManuals Logo

Fluke 51 II Series User Manual

Fluke 51 II Series
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
51 & 52 Series II
Maintenance
13
Maintenance
Replacing the Batteries
Refer to the safety information in Table 1 before replacing
the batteries.
1. Turn off the thermometer if necessary.
2. Loosen the screw and remove the battery door.
3. Replace the three AA batteries.
4. Replace the battery door and tighten the screw.
Cleaning the Case and Holster
Use soap and water or a mild commercial cleaner.
Wipe with a damp sponge or soft rag.
Calibration
To ensure that the thermometer performs to its accuracy
specifications, Fluke recommends that you calibrate the
thermometer annually, starting one year after purchase.
To calibrate the thermometer, contact Fluke for the
Service Center nearest you or follow the calibration
procedure in the service manual listed in "Replacement
Parts and Accessories."
Specifications
Environmental
Operating
Temperature
-10
o
C to 50
o
C (14
o
F to 122
o
F)
Storage
Temperature
-40
o
C to +60
o
C (-40
o
F to +140
o
F)
Humidity
Non condensing <10
o
C (<50
o
F)
95 % RH: 10
o
C to 30
o
C (50
o
F to 86
o
F)
75 % RH: 30
o
C to 40
o
C (86
o
F to 104
o
F)
45 % RH: 40
o
C to 50
o
C (104
o
F to 122
o
F)
1.888.610.7664 info@Fluke-Direct.com
Fluke-Direct
.com

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 51 II Series and is the answer not in the manual?

Fluke 51 II Series Specifications

General IconGeneral
Temperature Range-200°C to 1372°C (-328°F to 2501°F)
Resolution0.1°C or 0.1°F
Thermocouple CompatibilityJ, K, T, E
DisplayDigital, LCD
Battery Life1000 hours typical
Dimensions173 mm x 86 mm x 38 mm
Weight400 g
Operating Temperature0 °C to 50 °C
Storage Temperature-20 °C to 60 °C

Related product manuals