Fluke 51 II Series - Holding Displayed Readings; Viewing MIN, MAX, and AVG Readings; Using Offset for Probe Errors

51 & 52 Series II
Users Manual
8
Table 5. Buttons (cont.)
 Press  to start or exit Setup. (See "Changing Setup Options.")
 Press  to scroll to the Setup option you want to change.
Press  to increase the displayed setting.
 Press  to scroll to the Setup option you want to change.
Press  to decrease the displayed setting.
 Press  to enter a Setup option.
Press  again to store the displayed setting in memory.
1.888.610.7664 info@Fluke-Direct.com
Fluke-Direct
.com