Fluke 59 MAX User Manual

Infrared Thermometer
Safety Information
3
• See emissivity information for actual temperatures. Reflective objects
result in lower than actual temperature measurements. These objects
pose a burn hazard.
• Do not look directly into the laser with optical tools (for example,
binoculars, telescopes, microscopes). Optical tools can focus the laser
and be dangerous to the eye.
• Do not look into the laser. Do not point laser directly at persons or
animals or indirectly off reflective surfaces.
• Replace the batteries when the low battery indicator shows to prevent
incorrect measurements.
• Do not use the Product around explosive gas, vapor, or in damp or wet
environments.
• Use the Product only as specified or hazardous laser radiation exposure
can occur.
• Carefully read all instructions.

Fluke 59 MAX Specifications

General

Temperature Range	-30 °C to 500 °C (-22 °F to 932 °F)
Accuracy	±2 °C or ±2% of reading, whichever is greater
Distance to Spot Ratio	8:1
Response Time	< 500 ms (95% of reading)
Operating Temperature	0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature	-20 °C to 60 °C (-4 °F to 140 °F)
Display Type	LCD
IP Rating	IP40
Emissivity	0.95
Power	1 AA battery
Battery Life	12 hours
Dimensions	156 x 80 x 50 mm
Spectral Response	8 to 14 microns
Display Resolution	0.1 °C / 0.1 °F