EasyManuals Logo

Fluke 59 MAX User Manual

Fluke 59 MAX
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Infrared Thermometer
Maintenance
5
Maintenance
Warning
To prevent possible electrical shock, fire, or personal injury, have an
approved technician repair the Product.
Caution
To avoid damage to the Product, do not leave the thermometer on or near
objects of high temperature.
How to Change the Battery
To install or change the AA IEC LR06 battery, open the battery compartment and replace the
battery as shown in Figure 16.
How to Clean the Product
Use soap and water on a damp sponge or soft cloth to clean the Product case. Carefully wipe
the surface with a moist cotton swab. The swab may be moistened with water. See Figure 17.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 59 MAX and is the answer not in the manual?

Fluke 59 MAX Specifications

General IconGeneral
Temperature Range-30 °C to 500 °C (-22 °F to 932 °F)
Accuracy±2 °C or ±2% of reading, whichever is greater
Distance to Spot Ratio8:1
Response Time< 500 ms (95% of reading)
Operating Temperature0 °C to 50 °C (32 °F to 122 °F)
Storage Temperature-20 °C to 60 °C (-4 °F to 140 °F)
Display TypeLCD
IP RatingIP40
Emissivity0.95
Power1 AA battery
Battery Life12 hours
Dimensions156 x 80 x 50 mm
Spectral Response8 to 14 microns
Display Resolution0.1 °C / 0.1 °F

Related product manuals