Fluke 65 - Maintenance

Model 65 English Instruction Sheet
Page
8
Maintenance
Installing the Batteries
Remove the holster before replacing the battery or setting the
switches.
Caution
⇒ Match the + and − polarities of the battery with the
battery case.
⇒ Do not attempt to recharge the batteries.
⇒ Do not throw batteries into a fire.
⇒ Follow local laws or regulations when disposing
batteries.
The
B indicates battery life remaining. Replace both
batteries when
I starts blinking.
Cleaning the Focal Lens
Do not use solvents to clean the focal lens. Blow off loose
particles using clean, dry compressed air. Gently brush
remaining debris away with a camel hair brush or high-quality
lens tissue. The tissue may be moistened with clean water.
Cleaning the Case and Holster
Use soap and water or a mild commercial cleaner. Wipe with a
damp sponge or soft rag.