Fluke 714B - Key Functions

714B
Users Manual
10
Table 4. Key Functions
No. Name Description
  Turns the power on or off.
  Shifts to secondary function when pushed before other keys (Shift mode).
  Turns backlight on or off.
 
Increments output by 25 % of span. Secondary function: toggles between temperature units (°C or
°F.).
  Decreases output by 25 % of span.



Up/down arrow increases or decreases the source level. Cycles through different options.
Secondary functions: Enters Ramp or Step mode.
Left/right arrow cycles through and highlights the field to be edited.
In contrast adjustment mode; left- lightens contrast, right- darkens contrast.
Secondary functions: Left arrow enters mA measurement; right arrow enters temperature
measurement.



Sets a source value to 100 % or 0 % of span.
Secondary function: enables automatic value span of 100 % or 0 %.
  Shifts between Measure and Source modes.
 
Selects TC (thermocouple) measurement and sourcing function.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com