Fluke 714B - Page 22

Thermocouple Calibrator
Measure Temperature
17
Table 6. Thermocouple Types Accepted (cont.)
G Tungsten 100 to 2315 White Tungsten - 26 % Rhenium
D
Tungsten - 3 % Rhenium 0 to 2315 White Tungsten - 25 % Rhenium
P
Platinel 5355 0 to 1395 Platinel 7674
M
Nickel – 18 % Molybdenum -50 to 1410 Nickel - 0.8 % Cobalt
*American National Standards Institute (ANSI) device negative lead (L) is always red.
**International Electrotechnical Commission (IEC) device negative lead (L) is always white.
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com