Fluke 718Ex 30G - How to Contact Fluke; Safety Information

718Ex 30G/100G/300G
Users Manual
2
1000 psi in cmH
2
O, mbar, and mmHg units, and 3000 psi
in inH
2
O units. Pressures of at least 15 psi must be
measured for meaningful readings in bar and kg/cm
2
units.
The Calibrator is supplied with:
• a holster
• one installed 9 V alkaline battery
• one set of TL75 test leads
• one set of AC72A alligator clips
• a Control Drawing
• a CD-Rom
If the Calibrator is damaged or something is missing,
contact the place of purchase immediately. Contact a
Fluke distributor for information about accessories. See
Contacting Fluke. To order replacement parts or spares,
see Parts and Accessories.
How to Contact Fluke
To contact Fluke, call one of the following telephone
numbers:
Technical Support USA: 1-800-44-FLUKE
(1-800-443-5853)
Calibration/Repair USA: 1-888-99-FLUKE
(1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com
.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement,
visit http://us.fluke.com/usen/support/manuals
.
Safety Information
A Warning identifies conditions and actions that pose
hazard(s) to the user; a Caution identifies conditions and
actions that may damage the Calibrator or the equipment
under test.
Safety and electrical symbols used in this manual and on
the Calibrator are displayed in Table 1.