718Ex 30G/100G/300G
Users Manual
22
Cleaning
Periodically wipe the case with a damp cloth; do not use
abrasives or solvents.
Calibration
Fluke recommends that the Calibrator be calibrated once
yearly to ensure that it performs according to its
specifications. A calibration manual is available.
Call 1-800-526-4731 from the U.S.A. and Canada. In other
countries, contact a Fluke Service Center.
Replacing the Battery
XW Warning
• To avoid false readings, which could lead to
possible electric shock or personal injury,
replace the battery as soon as the battery
indicator
B
appears.
• Remove the Calibrator from the Ex-hazardous
area before opening the battery door.
• Use only the battery types listed in the
Approved Battery Table.
When
B
appears on the display, replace the 9 V
alkaline battery. Refer to Figure 7.
Hex Head
Wrench
alz008f.eps
Figure 7. Battery Replacement
To Next Page
Loading...
