Fluke 71X Series Manual

718 30G/100G
Product Overview
2
Table 1. Pressure Sensor Range and Resolution
Displayed
Pressure
Units
Model 718 30G Range
and Resolution
Model 718 100G
Range and
Resolution
psi -12.000 to 30.000 psi -12.00 to 100.00 psi
inH
2
O at
4°C
-332.16 to 830.40
inH
2
O
-332.2 to 2768.0
inH
2
O
inH
2
O at
20°C
-332.75 to 831.87
inH
2
O
-332.8 to 2772.9
inH
2
O
cmH
2
O at
4°C
-843.6 to 2109.0
cmH
2
O
-843.6 to 7030.0
cmH
2
O
cmH
2
O at
20°C
-845.2 to 2113.0
cmH
2
O
-845.2 to 7043.0
cmH
2
O
bar -0.8274 to 2.0685 bar -0.8274 to 6.8950 bar
mbar -827.4 to 2068.5 mbar -827.4 to 6895.0 mbar
kPa -82.74 to 206.85 kPa -82.74 to 689.50 kPa
inHg -24.432 to 61.080 inHg -24.43 to 203.60 inHg
mmHg
-620.6 to 1551.4
mmHg
-620.6 to 5171.5
mmHg
kg/cm
2
-0.8437 to 2.1090
kg/cm
2
-0.8437 to 7.0306
kg/cm
2
Standard Equipment
The items listed below are included with your calibrator. If
the calibrator is damaged or something is missing, contact
the place of purchase immediately. To order replacement
parts or spares, see the user-replaceable parts list near
the end of this manual.
• TL75 test leads (one set)
• AC70A Alligator clips (one set)
• Holster
• 718 Product Overview Manual
• 718 CD-ROM (contains Users Manual)
• Fluke-700ILF In-Line Filter
Safety Information
Use the Calibrator only as specified in the Users Manual,
otherwise the protection provided by the Calibrator may be
impaired.
A Warning identifies conditions and actions that pose
hazard(s) to the user; a Caution identifies conditions and
actions that may damage the Calibrator or the equipment
under test.

Fluke 71X Series Specifications

General

Brand	Fluke
Model	71X Series
Category	Test Equipment
Language	English