Documenting Process Calibrator
Operation Features
13
Table 4. Buttons (cont.)
Button Description
J U, D, L, R
Push U or R to increase display intensity. Push D or L to decrease intensity (seven
levels).
Make choices from lists on the display.
Increase or decrease the source level when using the step feature.
In calculator mode, provides arithmetic functions (+ - ÷ ×).
K C
Clears a partial data entry, or prompts for output value when in the SOURCE mode.
When you use a pressure module, zeros the pressure module indication.
L E
Completes a numeric entry when a source value is set, or confirms a choice in a list. In
calculator mode, acts as the equals arithmetic operator (=).
M q
Toggles between resistance and continuity functions in MEASURE mode, or selects the
resistance function in SOURCE mode.
N h
Toggles between ac voltage and frequency functions in MEASURE mode, or selects
frequency output in SOURCE mode.
O
Numeric
keypad
Used when a numeric entry is necessary.
P M Cycles the Product through MEASURE, SOURCE, and MEASURE/SOURCE modes.
To Next Page
Loading...
