Fluke 754 - Page 20

753/754
Getting Started
16
Safety
General ................................................................................................................ IEC 61010-1: Pollution degree 2
Measurement ....................................................................................................... IEC 61010-30: CAT II 300 V
Power ........................................................................................................................ Internal battery pack: Lithium Ion, 7.2 V dc, 30 Wh
External Power Supply: 15 Vdc, 2 A
Operating Altitude .................................................................................................... 3000 m (9842 ft)
Storage Altitude ....................................................................................................... 13000 m (42650 ft)
Operating Temperature ........................................................................................... -10 to 50 °C
Storage Temperature .............................................................................................. -20 to 60 °C
Relative Humidity (Maximum, non-condensing) ................................................... 90 % to 35 °C
75 % to 40 °C
45 % to 50 °C
Intrusion Protection. ................................................................................................ IEC 60529: IP52 non-operating
Maximum Voltage Between any Terminal and Earth Ground .............................. 300 V
Electromagnetic Compatibility (EMC)
International .............................................................. IEC 61326-1: Basic Electromagnetic Environment
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-
coupled radio frequency energy that is necessary for the internal function of the
equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic
and those directly connected to a low-voltage power supply network that
supplies buildings used for domestic purposes. There may be potential
difficulties in ensuring electromagnetic compatibility in other environments due
to conducted and radiated disturbances.